HGTV Dream Home 2012: Make a Planter Box
Create stylish planters, complete with bolt head trim, to flank and define your front door.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Insert the 22" x 22" (bottom) panel inside the planter so it rests on top of the posts. Center the panel. Secure the bottom by drilling 1 5/8" screws through the bottom panel and into the posts.
Attach Rough-Sawn Cypress Trim
Using finishing nails, attach four 24" trim pieces to each side panel of the planter box. Equally space pieces, assuring that top and bottom trim sits flush to edges and covers nail heads. Attach four 25-1/2" trim pieces to the front and back panels, aligning with the 24” trim pieces on side panels. Tap pieces into place with a hammer.
Drill Pilot Holes for Decorative Carriage Bolts
To make a marking jig (template), drill holes, spaced 5 inches apart and 2 1/2" from each edge, in a 24" piece of trim. Place jig atop each attached trim piece, and using the 5/16" bit, drill holes through trim piece and plywood planter. You will drill a total of 80 pilot holes.
Follow the lead of HGTV Dream Home interior designer Linda Woodrum and display your favorite decorative home accessories atop...
Can't get enough of HGTV Dream Home? Our Dream Cam captured every moment of the excitement — right from the New Mexico...(59 photos)
Construction of HGTV Dream Home 2010 continued from late summer into mid fall. View time-lapse photos that captured the action.(59 photos)