Key Coat Rack

Steps:

1. Cut the two pieces of 1x10 to desired length. Wood glue them together and let dry overnight, which will create the thickness of the key.

Figure A

2. Once dry, use a felt tip marker and draw a key design (figure A).
3. Cut out the key with a jigsaw and a scroll blade to make a nice smooth cut.
4. Sand the edges of the entire key. Remove dust and stain desired color. Apply two coats of water-based polyurethane, according to manufacturer's instructions, to protect the finish.

Figure B

5. Drill pilot holes for the hook screws and then attach the decorative hooks (figure B).

Figure C

6. Attach a saw tooth hook to the back side of the rack (figure C) and hang.