Create a Curtained Headboard with Sconces
Traditional-style sconces are surrounded by shirred curtains to make an elegant headboard.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Tools and Materials:
drill with Phillips head bit
fabric (ours was a cotton fabric)
four rod brackets
two drapery rods
two J-boxes (metal boxes to house electric wiring, also called pancake boxes)
two electric sconces
two electric cords with switches
1. Measure and mark your fabric:
- Three lengths of fabric to the desired height of your headboard. Include an extra four to six inches to allow for a pocket rod at the top and bottom of your panels. This allowance will vary depending on the diameter of the rods.
- The width of each panel should be double the finished width to create a gathered/shirred effect. Also, the center panel should be wider than the two end panels. The width of the end panels should match the placement of the sconces.
2. Cut the fabric adding a 1/2-inch to each side to allow for the seams. Fold the fabric over at the top and bottom creating a pocket for the rod to slide through.
3. Pin all the pieces together with straight pins in a vertical fashion so the machine can sew over the pins.
4. With a sewing machine, stitch all the pieces together along the backside of the fabric. Remove all pins once seems and rod pockets have been stitched.
5. Measure and mount a set of brackets to the top and bottom of the wall being covered. The top brackets should face upward and the bottom brackets downward. Mount them in opposite directions to create the tension needed so that the fabric is pulled taut.
6. Slide the three panels onto the rods and hang rods on the secured brackets.
7. Fan the fabric out, then pull the inside of the end panels back enough so that you can mark the wall where the sconces will hang. Once the wall is marked, affix a metal light box on each side.
8. Wire your sconces into the light box openings. Finish by plugging-in their cords.
Create your own reversible headboard slipcover with the help of Design Star finalist Alice Fakier.
Steve Watson shows how to install a fabric headboard as part of a bedroom makeover.
A bedroom with a steeply pitched ceiling gets a custom-built headboard.(video 06:05)