Mark Reynolds of Austin, Texas, has been crafting these intriguing visual toys for 28 years.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
The only woodworking experience Mark Reynolds has is "a mandatory woodshop class in high school." But after he decided to help his brother fill some holiday orders for his new kaleidoscope business, Mark became hooked. He learned how to embellish the pieces with a wooden veneer and, 28 years later, he is still going strong with these finely crafted visual toys.
Materials and Tools:
9" x 12" cherry wood veneer
Formby's tung oil
glass (eye piece and end piece)
front surface mirrors
hot glue gun and glue sticks
wound paper tubes
acrylic endcap with glass cover
stained glass, dichroic glass, seashells, etc. for end piece
hand-blown glass rods
poplar wood base, painted black
1. To make the wood "body": Cut veneer wood to size and spread wood glue on it. Apply the veneer to a core (mailing tube) using a hot iron. Inlay decorative wood strips into the tube.
2. Sand and put four coats of wood sealer and lacquer on tubes. Cut the tube into sections that you build a rotating mechanism into.
3. Paint all the ends and glue an eye piece into the top of the tube. Coat the top with an epoxy coating.
4. To build the end-piece: Fill a clear acrylic "cup" with glass, shells, gemstones, beads, etc. Cover with a glass circle and
seal with glue.
5. Drill a hole into the chamber and inject mineral oil into it; then seal the hole.
6. To build mirror system: Cut mirrors to length. Build these into a triangular assembly using masking tape and hot glue.
7. Finishing the scope includes inserting and hot gluing the mirrors into the body of the scope and then gluing in the end-piece.
This playful, vibrant wood-framed mirror reflects the lighter side of life.