Way to Grow Growth Chart
Chart your child's growth with this cute and quick quilted project.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Instructions provided courtesy of quilt artist Tom Russell.
Materials and Tools:
12-1/2'' x 48-1/2'' rectangle for top (this can be one single piece or random blocks)
12-1/2'' x 48-1/2'' rectangle for backing
16'' x 54'' rectangle of polar fleece or batting
four 7-inch squares for flower fronts
four 7-inch squares for flower backs
four 7-inch squares of matching polar fleece
four large complementary buttons for flower centers
four, 5'' x 3'' rectangles for leaf fronts (either one fabric or make each side of the leaf a different color)
four, 5'' x 3'' rectangles for leaf backs
four, 5'' x 3'' rectangles of matching polar fleece
5/8'' wide green rickrack
1/2-inch wide green rickrack
four large buttons for flower centers
1. Assemble the panel background pieces and cut to size. Layer the elements in this order; batting, top (face up), backing (face down). Pin the layers together to prevent shifting.
2. Using a walking foot, straight stitch 1/4-inch in from the edge around the perimeter of the wall hanging. Leave a five-inch opening to turn the panel inside out. Backstitch at the beginning and ending of the opening. Clip the corners of the panel to remove bulk. Remove the pins and trim the batting even with the raw edges. Turn the panel inside out and slipstitch the panel closed.
3. Locate on the left side of the panel the following positions, 1-foot, 1-1/2-foot, 3-foot, 3-1/2 foot. Place a pin at each of these positions. On the right side place a pin at these positions, 1/2-foot, 2-foot, 2-1/2-foot and 4-foot. Set the panel aside.
Flowers and Leaves
1. Assemble your quilt sandwich as you would with any quilting project. Using a stipple pattern, quilt over the entire surface of the square. Do this for both the leaf and flower units. Set units aside.
2. Transfer the flower and leaf patterns outlines to the dull side of the freezer paper. Cut the shapes out on the pattern line.
3. Position the freezer paper patterns on top of the appropriate square and iron down. Press only long enough to secure the pattern to the fabric.
4. Once the freezer paper is secure, use a small pair of scissors to cut along the edge of the pattern. After the pattern is completely cut out remove the pattern.
5. Because the elements have a raw edge, run a line of stitching around the entire shape. Using a straight stitch, sew approximately 1/4-inch in from the outside edge of the flower and leaf. Secure the thread ends.
6. Referring to the diagram place the flowers into position. Create the flower stem with 5/8-inch wide rickrack. Starting from the 4-foot mark/flower, tuck one end of the rickrack under a flower petal. Work your way down the panel and pin stem in place.
7. Referring to the diagram. Find the leaf positions and make sure they connect to the flower stem. Adjust stems as needed.
8. Referring to the diagram. Create smaller stems off the main stem using 1/2-inch size rickrack and pin in place. Using a straight stitch sew down all the stems.
9. Once everything is sewn down stipple quilt the entire panel. Quilt over the rickrack to secure it as well.
10. After the panel has been fully quilted, glue the flowers and leaves into position. Attach a button for flower centers. These will add extra construction support and dimension.
Like this designer's style? See how Tom Russell tackled a Simply Quilts challenge block project with his Scrap Bag Bouquet design.
You don't have to remodel your kitchen to make it eco-friendly. Here are five easy ways to get a green kitchen now.